Posted on: 6 November 2020
If you are working on a project that requires that you connect small, fine metal components and wires together, you may reach for your soldering gun to help make the connections. However, before you start soldering, you may want to consider using a silver brazing technique instead, depending on the type of project you are working on. There are a couple of advantages to using silver brazing alloy instead of solder, especially in a few specific situations.
1. Electrical Conductivity of the Silver Makes It Useful for Wiring Projects
One advantage of using a brazing technique that uses silver alloy instead of soldering is that the silver serves as a conduit for electricity. The material from which solder is constructed is typically non-conductive and may even block the current.
If you are working on a project where you need to make continuous wire connections, using the solder could inhibit or slow down the electrical current. This may require you to insert extra components, increasing the number of pieces that you have to work with.
However, if you use a silver brazing alloy, you will not require these extra components since the silver serves as its own conductor. It will create a strong connection between wires that will provide an uninterrupted current.
2. Connections Made by Silver Brazing Are Leakproof and Non-Corrosive
Another instance where silver brazing stands out from soldering when working on a project is that the connection it makes is leakproof. Most soldering materials are not only prone to leaks, but they are also susceptible to rust and corrosion.
If you are working on a project for a submersible part, using solder will increase your chances of water contamination and faster deterioration. However, since silver is non-corrosive, it will not deteriorate as quickly. It will not only keep the finished project from leaking initially but it will also help to prevent water leaks from forming in the future since the connection will not rust over time.
While soldering has its place for some projects, if you need a leakproof seal or electrical conductivity, using a brazing method with a silver alloy is preferential. If you have any further questions about this process, speak with a representative of a business that offers silver brazing alloy products to learn more about their use. They can also tell you whether you should use this technique over soldering for your current project.Share